Horizontal Streaks Of Uneven Density (Low-Resistance Paper) - Ricoh Pro C7500 Original Instructions Manual

5. Image Quality Problem: Lines/Streaks
• 1214-13: Paper Transfer Output: S: Side 1: Clear/Special
• 1214-14: Paper Transfer Output: S: Side 1: White
• 1214-15: Paper Transfer Output: S: Side 1: Metallic
• 1214-17: Paper Transfer Output: S: Side 2: Clear/Special
• 1214-18: Paper Transfer Output: S: Side 2: White
• 1214-19: Paper Transfer Output: S: Side 2: Metallic
3. Print the image. Has the problem been resolved?
Yes
No
4. In 1214: [Paper Transfer Output], further adjust the values in the applicable settings in
steps of ±1.
5. Print the image and check if there are any problems such as faintness or white spots.
Yes
No
• Select "Clear/Special" when using Neon Yellow, Neon Pink, or Invisible Red. Select "Metallic"
when using Gold or Silver.

Horizontal Streaks of Uneven Density (Low-Resistance Paper)

When printing is performed on low-resistance paper such as metallic paper or black paper, horizontal
streaks of uneven density appear in the area approximately 85 mm (3.3 inches) from the trailing edge
of the paper.
156
Finished!
Go to the next step.
No further improvement is likely.
Finished!
85 mm
(3.3 in.)
DXT839