6.
Print and check if the stain on the edge of the paper is within the acceptable range. (Print
10 or more sheets.)
Yes
Finished!
No
Go to the next step.
7.
Change the print speed to "Low".
8.
Print and check if the stain on the edge of the paper is within the acceptable range. (Print
10 or more sheets.)
Yes
Finished!
No
Go to the next step.
9.
Go back to 1232: [Fusing Temperature] and increase the fusing heat roller's temperature
by 5°C.
10.
Print and check if the stain on the edge of the paper is within the acceptable range. (Print
10 or more sheets.)
Yes
Finished!
No
If the problem persists even if you lower the value to 200°C, contact your service
representative.
• Select "Clear/Special" when using Neon Yellow, Neon Pink, or Invisible Red. Select "Metallic"
when using Gold or Silver.
Dirtied Printouts
55