White Streaks When Printing On Cast-Coated Paper - Ricoh Pro C7500 Original Instructions Manual

• 1231-10: Print Speed: BW/FC/FCS: Fuser Setting HQ: BW/FC/FCS
• 1231-11: Print Speed: FCS: Fuser Setting HQ: Clear/Special
• 1231-12: Print Speed: FCS: Fuser Setting HQ: White
• 1231-13: Print Speed: FCS: Fuser Setting HQ: Metallic
• 1231-15: Print Speed: S: Fuser Setting HQ: Clear/Special
• 1231-16: Print Speed: S: Fuser Setting HQ: White
• 1231-17: Print Speed: S: Fuser Setting HQ: Metallic
4. Print the image. Did the image quality deteriorate?
Yes Change [Output Mode] to [Normal] in 1218: [Paper Transfer Output], restore the
previous setting in 1231: [Print Speed], and then go to Step 6.
No Go to the next step.
5. Has the problem of fainter prints been resolved?
Yes Finished!
No Go to the next step.
6. In the [Machine: Maintenance] group on the [Operator Adjust.] menu, select 0506:
[Execute Developer Refreshing], and then execute 02: [Black].
7. Print the image. Has the problem been resolved?
Yes Finished!
No Contact your service representative.
8. Execute Toner Refreshing.
Then print 30 sheets of solid-fill images with 100% density for each color of CMYK.
If the problem persists or is not reduced, there is no other solution.
• Select "Clear/Special" when using Neon Yellow, Neon Pink, or Invisible Red. Select "Metallic"
when using Gold or Silver.
• After performing the solution, it is recommended to perform the color calibration of the external
printer controller.

White Streaks When Printing on Cast-Coated Paper

Raindrop-like white streaks occur when printing is performed on cast-coated paper.
Unprinted
119