Setting Printer Parameters: Phaserlink Printer Management Software Pages; Information Forwarding - Tektronix Phaser 740 Network Manual

12
PhaserLink Printer Management Software
Setting printer parameters: PhaserLink Printer Management
Software pages

Information Forwarding

Disabling Information Forwarding
128 PhaserShare Networking Manual
If there are read-write parameters on the page, there is a field at the bottom of the
page for a validation password. By default, the password is a NULL string (no
characters). The password is common across all PhaserLink Printer Management
Software pages.
N
O T E
PhaserLink passwords are not encrypted.
If you enter an invalid password, the printer reports an error. The
Validation Password link displays the Set Administrator Password page,
which you can use to change the password.
Click Restore Initial Form Values to restore all the values on the page to
their previous settings.
To transmit changes to the printer, click Do/Apply.
When you click a link that connects you to the Tektronix web server, the Information
Forwarding feature causes the printer to send the following printer status
information back to the Tektronix server:
Printer model
Firmware version
Printer ID number
Page count
Language
Serial Number
Transmitting this information back to the Tektronix server ensures the quickest
connection to relevant product and update information. Tektronix may store this
information to serve you better in the future.
1.
Display the View and Configure Information Forwarding page.
2.
Select No from the Information Forwarding Enabled menu button.
3.
If a validation password has been assigned, enter the password to make the
change to take effect.
N
O T E
PhaserLink passwords are not encrypted.
4.
Click Do/Apply.