Cylinder Head Unit Disassembly - Kohler KDI 1903M Workshop Manual

INFORMATION FOR DISASSEMBLY
7.10.2 Flange housing
1.
Undo the screws F and remove the engine housing
G.
Danger
•
The housing G is very heavy, pay utmost attention
while removing in order to prevent it from falling, with
serious consequences for the operator.

7.11 Cylinder head unit disassembly

7.11.1 Rocker arm pin
1. Undo the screws A.
2. Remove the rocker arm pin unit B.
7.11.1.1 Rocker arm (
1. Remove the retainer snap ring C.
2. Remove the shoulder rings D.
3. Remove the rocker arms E and springs.
7.11.2 Rods and u-bolts
1. Remove the valve control U-bolts H.
2. Remove the rocker arm control rods L.
)
Fig 7.29
Fig 7.30
Fig 7.31
Fig 7.33
7
85
EN