Assembly Information; Information On Engine Configuration; Assembly Recommendations - Kohler KDI 1903M Workshop Manual

9

9 ASSEMBLY INFORMATION

9.1 Information on engine configuration

• In this chapter, the engine is represented as "BASE CONFIGURATION" (refer to
1.4).
• For the assembly of components not described in this chapter refer to
• The following are the components described in
11.1 Oil dipstick in cylinder head
11.2 Heater (replacement)
11.3 Idler gear (for 3
11.4 3 PTO (replacement)
rd
11.5 4 th PTO (replacement)
11.6 3 + 4 PTO (configurations)
rd th
11.7 Balancer shafts (replacement)
11.8 Air filter (cartridge replacement)
11.9 Remote oil filter (disassembly and assembly)
11.10 Intake circuit (replacement)
11.11 Muffler (replacement)
11.12 Cooling circuit (replacement)
11.13 Engine feet (information)

9.2 Assembly recommendations

•
The information is laid out in sequence, the intervention methods have been selected, tested and
approved by the manufacturer's technicians.
•
This chapter describes the installation procedures for the assemblies and/ or individual components
which have already been checked, overhauled or possibly replaced with original spare parts.
• Where necessary, reference to special tools during assembly operations is indicated and identified
in Tab. 13.1, hereinafter in Tab. 9.1 an example of a special tool (ST_05).
Tab. 9.1
"ST" Code
ST_05
EN 110
ASSEMBLY INFORMATION
rd / 4 th PTO)
SPECIAL TOOLS
Picture /draw
Chap. 11.
DESCRIPTION
Six nicks Key SN 8
Par 1.3 - Par.
Chap. 11.
PART NUMBER
ED0014603650-S