Kohler KDI 1903M Workshop Manual page 43

2.15.8 Fuse
Device G is assembled on cylinder head P (flywheel side);
it protects the electrical circuit in the event of an overload
or short circuit.
NOTE: Component not necessarily supplied by KOHLER.
2.15.9 Control panel (optional)
Panel L can be assembled on the engine or machine.
The connectors are described in Tab. 2.36, the main
functions are illustrated.
NOTE: Component not necessarily supplied by KOHLER.
Tab 2.36
POS. DESCRIPTION
M Hour-meter indicator
S Control switch to start the engine
W1 Panel ignition indicator
W2 Warning Light - battery not charging
W3 Warning Light - engine oil not pressurised
W4 Warning Light - high coolant temperature
W5 Warning Light - alarm general indicator
TECHNICAL INFORMATION
Fig 2.41
Fig 2.42
2
43
EN