Information And Safety Signals - Kohler KDI 1903M Workshop Manual

Warning
This indicates that failure to comply with it can cause minor damage or injury.
Safety guards Hereunder is a list of safety guards that must be worn prior to carrying out any type
of operation and to avoid potential harm to the operator.
Use suitable protective gloves before carrying out any type of operation.
Use protective goggles before carrying out any type of operation.
Use earmuffs before carrying out any type of operation.

3.5 Information and safety signals

ACCIDENTAL START
Accidental Starts can
cause severe injury or
death.
Before working on the engine or
equipment, disconnect the battery
negative (-) wire.
HOT PARTS
Hot Parts can cause
severe burns.
Engine components can get extremely hot
from operation. Do not touch engine while
operating or just after stopping.
Never operate the engine with heat shields
or guards removed.
SAFETY INFORMATION
HIGH PRESSURE FLUID RISK OF PUNCTURE
Work on the injection system must be carried out
by suitably trained staff wearing protection
equipment. Injuries caused by fluid penetration are
highly toxic and dangerous.
If an injury occurs, seek immediate medical
attention.
Fuel is flammable and its vapours can ignite. Store
fuel only in approved containers, in well ventilated,
unoccupied buildings. Do not fill the fuel tank while
the engine is hot or running, since spilled fuel
could ignite if it comes in contact with hot parts or
sparks from ignition. Do not start the engine near
spilled fuel. Never use fuel as a cleaning agent.
High Pressure Fluids can puncture
skin and cause severe injury or
death.
EXPLOSIVE FUEL
Explosive fuel can cause fires and
severe burns.
3
53
EN