Kohler KDI 1903M Workshop Manual page 157

INFORMATION ABOUT OPTIONAL
3. Position the flange K on the crankcase Q inserting
the gasket P, and inserting the gear N up to the
stop on the bearing R
4. Secure the flange K using the screws N (tightening
torque at 25 Nm).
Important
•
Always replace the gasket V after each assembly.
5. Insert the gasket V on the cover F, insert and
position the cover F on the flange K.
6. Secure the cover F using the screws E on the
flange K (tightening torque at 25 Nm)
Important
•
Always replace the gasket T after each assembly.
7. Position and secure the flange D using the screws
C on the crankcase S (tightening torque at 10 Nm).
Important
•
Always replace the gasket U after each assembly.
8. Position the gasket U on the flange D.
9. Secure the pump B using the screws A on the
flange D (tightening torque at 25 Nm).
COMPONENTS
11.41).
(Fig.
Fig 11.28
Fig 11.29
Fig 11.30
Fig 11.31
11
157
EN