INFORMATION FOR DISASSEMBLY
7.8.5 Injection pump
Important
•
Before disassembling, carefully read
•
The injector pump cannot be repaired.
1. Carry on operations described in
Par.
6.1.5.
2. Undo the nut S and remove it together with the
washer.
3. Screw the unit
ST_04
4. Undo the screws T.
5.
Tighten the screw U of the unit in order to
separate the injector pump S from the high
pressure pump control gear R.
NOTE: Click by side to play the procedure.
7.8.6 Fuel filter (
)
NOTE: to disassemble the fuel cartridge, refer to
operations 3 and 4 of
Par.
1. Undo the screws V and remove the filter support
W.
Par.
2.17.
steps 1-13
on the gear R.
6.7.1.
Fig 7.22
Fig 7.23
Fig 7.24
https://www.youtube.com/embed/tQ9VHKF
4u_0?rel=0
Fig 7.25
7
83
EN