11
11.8 3rd + 4th PTO (configurations)
Fig. 11.32
11.8.1 Information
Hydraulic pumps on the 3rd and 4th PTO can be installed at
the same time.
In some configurations, there is also the centering ring C on
the 4th PTO.
Important
•
For disassembly or installation, refer to
Par. 11.6
•
Always replace the gasket of the rings B and C and
flanges D and K at each assembly.
•
Lubricate the gear H with oil.
11.9 Balancer device (replacement)
Important
•
Before proceeding with operation, read
3.3.2.
EN
158
INFORMATION ABOUT OPTIONAL
COMPONENTS
and
Par.
11.7.
Fig. 11.33
Par.
11.5,
Par.