11
11.13.1 Disassembly
1. Undo the screw A.
2. Undo the nuts B.
3.
Remove the muffler C.
11.13.2 Assembly
1. Position the gasket D and the muffler C on the
intake manifold E.
2. Position the muffler C on the bracket F and
tighten the screws A (tightening torque at 25 Nm).
3. Tighten the nuts B (tightening torque at 25 Nm).
11.14 Cooling circuit (replacement)
Important
•
Before proceeding with operation, read
11.14.1 Radiator disassembly
1. Release the clamp A.
2. Remove the sleeve B.
EN
166
INFORMATION ABOUT OPTIONAL
COMPONENTS
Par.
Fig. 11.57
Fig. 11.58
3.3.2.
Fig. 11.59