10
10 FLUIDS FILLING INFORMATION
10.1 Engine oil
Important
•
Before proceeding with operation, read
•
Do not use the engine with the oil level below the
minimum.
1. Loosen the oil filler cap A or the oil filler cap C if the
cap A is not accessible.
2. Add the type and amount of oil recommended
2.2).
3. Remove the oil dipstick B and check that the level is
up to but does not exceed the MAX.
4. If the oil level is not at MAX, insert more oil until the
MAX level is reached as indicated on the dipstick.
5. Re-tighten the cap A or C.
NOTE: See the
oil dipstick.
10.2 Coolant
Important
•
Before proceeding with operation, read
EN
142
FLUIDS FILLING INFORMATION
Par. 11.1
for the various configurations of the
Par.
3.3.2.
(Tab.
Fig 10.1
Fig 10.2
Par.
3.3.2.