11.5 Idler gear (for 3rd / 4th PTO)
Important
•
Before proceeding with operation, read
11.5.1 Disassembly
1. Undo the screw A and remove the gear unit B.
2. Remove the retainer ring C from the seat of the pin D.
3. Remove the shoulder washer E, the gear B, the shoulder
ring F and the bushing G from the pin D.
11.5.2 Assembly
1. Fit into the pin D:
- The shoulder ring F (of least thickness)
- The gear B
- The shoulder ring E
- The retainer ring C.
2. Insert the bushing G on the crankcase L.
Important
•
Always replace the washer H every time it is
disassembled.
Modified component, see service letter 700019 -
700021.
•
Check that the perforated screw A is free from
impurities inside it.
INFORMATION ABOUT OPTIONAL
COMPONENTS
Par.
3.3.2.
Fig 11.8
Fig 11.9
Fig 11.10
Fig 11.11
11
151
EN