Kohler KDI 1903M Workshop Manual page 185

F
Figure.
Fig.:
Functional Component, or group of main components, able to carry out specific functions on
units: the engine.
G
Galvanised:
Grinding (valves
and seats):
H
Heater: A device that heats the intake air by means of an electrical resistor.
Type of extreme condition referred to the work environment in which the engine is
Heavy
used (very dusty - dirty area, or in a contaminated environment due to various types
conditions:
of gas).
I
Idle speed operation:
K
KDI:
M
A group of maintenance actions that have the sole objective to control and replace
Maintenance -
elements on their expiry, without modifying or improving the functions carried out
periodic
by the system, neither increasing the value nor improving performance.
MAX: Maximum.
It is a mixture of products by means of a chemical conversion of oils and animal
Methyl ester:
and/or vegetable fat, which is used to produce Biofuel.
Min.: Minutes.
MIN: Minimum.
Model: Model, engine identification plate, which indicates the engine's model.
GLOSSARY
Material that has undergone surface protection treatment.
Cleaning operation of the valves and seats carried out with an abrasive paste
(refer to an authorised service station for this type of operation).
Operation of a running engine with the vehicle stopped and on idle speed.
"Kohler Direct Injection"
15
185
EN