Kohler KDI 1903M Workshop Manual page 160

11
6. Remove the shafts J and K in the direction of
the arrow L from box F.
11.9.2 Assembly
1. Lubricate the bushings V with Molikote grease.
2. Insert the shafts J and K inside the box F in the
direction of the arrow M.
3. Make sure that the shafts J and K inside the
box F observe the marks N and that the shaft J
with the gear indicated by letter " S " stamped
on it is on the left with respect to the box F.
4. Secure the plate H using the screws G on the
box F (tightening torque at 8 Nm).
EN 160
INFORMATION ABOUT OPTIONAL
COMPONENTS
Fig 11.38
Fig 11.39
Fig 11.40
Fig 11.41