11
12. Insert gaskets N into seats P of bypass
tube D.
13. Fasten bypass tube D onto oil sump F
using capscrews C (tightening torque at
10 Nm).
11.16.5 Flange plate / housing assembly
1. Execute the operations described in point
6 of Par. 11.14.4.
2. Fasten housing or plate L by using
capscrews A and strictly following the
order shown in Fig. 11.79 (tightening
torque at 85 Nm).
3. Fasten housing or plate L by using
capscrews B (tightening torque at 270
Nm).
11.16.6 Flywheel assembly
1. Execute the operations described in
9.5.2.
EN
172
INFORMATION ABOUT OPTIONAL
COMPONENTS
Par.
Fig. 11.79
Fig. 11.80