11.17 Oil sump 15L
11.17.1 Disassembly
1. Perform the operations indicated in
2. Loosen the screws A and remove the oil sump B .
3. Loosen the screws A1 and remove the oil sump B1
flange.
11.17.2 Assembly
1. Apply a bead of approx. 2.5 mm of sealant ( Loctite
5660 ) inside the channel B2 of the oil sump B1
flange.
2. Position the oil sump B1 on the crankcase H at the
fixing holes (use the tool
3. Screw the screws A1 in the fixing holes.
INFORMATION ABOUT OPTIONAL
COMPONENTS
Par. 5.2
ST_18
).
.
Fig. 11.81
Fig. 11.82
11
173
EN