Kohler KDI 1903M Workshop Manual page 168

11
11.14.2 Fan disassembly
1. Undo the screws P and remove the plate Q from
the fan R.
11.14.3 Fan assembly
1. Assemble the fan R on the pulley U.
2. Position the plate Q on the fan R.
3. Fasten the fan R by using the screws P and
interposin washers S (tightening torque at 10 Nm).
11.14.4 Radiator assembly
1. Position the radiator on the support V.
2. Fasten radiator M on support V by means of nut N
inserting washer W (tightening torque at 20 Nm).
3. Fit the sleeve L on the fitting of the radiator M.
4. Tighten the clamp H.
EN 168
INFORMATION ABOUT OPTIONAL
COMPONENTS
Fig. 11.64
Fig. 11.65
Fig. 11.66
Fig. 11.67