6
6.1.10 Installation of the fuel injector pipes
(pump injector/injectors)
1. Position pipes D on the injectors and on the
injector pump.
Important
•
Tighten the nuts E and F manually, without
clamping them.
2. Tighten the nuts E ed F (tightening torque at
25 Nm).
3. Reinstall the retainers C of the hoses D.
4. Fix the plate B by using screws A
(tightening torque to 10 Nm).
6.2 Coolant pump replacement
6.2.1 Disassembly
1. Perform the operations described in
Important
•
Before proceeding with operation, read
•
The pump G isn't repairable.
2.
Loosen the screws A and B.
3.
Push the alternator C in the direction of the arrow D
and remove the belt E.
4.
Loosen the screws F and remove the pump G and
relative gasket H.
EN
68
INFORMATION FOR REPLACING THE
FUNCTIONAL UNITS
Par.
Fig 6.29
Fig 6.30
5.1.
Fig 6.31
Par.
3.3.2.
Fig 6.32