Exact Position; Zoom Options; Set Cursor Point; Exact Position Exercise - Husqvarna VIKING Designer Epic 3 User Manual

Exact Position

Use exact position to place a design on an exact location on
your fabric without re-hooping.
It can also be useful when you want to embroider a design to
exactly match a specific spot on your project or next to a
previously embroidered design.
Tip: Use the projection as a help when using exact position. By
activating the projector, you can see how the design will be stitched out on
the fabric.

Zoom Options

Use the different zoom options to zoom in on your design(s).
You can also use the zoom slider. When using the zoom to
cursor it will maximize the zoom and pan the embroidery
area so the cursor position is centered on the screen.

Set Cursor Point

Move the cursor point to any of the selected corners or to
the center of the design. The set cursor point can be used to
trace the design field by touching each of the four corner
icons. Find the center of the design by touching the set
cursor point center icon.

Exact Position Exercise

Follow the instructions on screen.
1. Select a Locking Point on Screen
Move the cursor with your finger to the point in the design
on your screen that you want to match to a point on your
fabric/previously stitched design. Fine tune with the fine
tuning controls. If you want to place the locking point in a
corner or center of the design, touch zoom to cursor to
maximize the zoom and pan the embroidery area for exact
position of the cursor.
126
1
2
Set Position
STEP 1
1. Select a locking point on screen
2. Set matching point on screen
3. Rotate design on fabric
4. Move locked point on fabric
5. Set cursor
6. Pan
10 Embroidery Stitch-Out
4
3 5
MOVE
1.0
10 11
7. Zoom to all
8. Zoom to hoop
9. Zoom to cursor
10. Move
11. Set cursor point
12. Fine tuning controls
Zoom to all/Zoom to hoop/Zoom to cursor
6 7 8 9
1.5
12