WiFi Introduction
Your DESIGNER EPIC™ 3 machine features WiFi, which makes it possible to connect your machine wireless to the
mySewnet services.
Getting Started With WiFi
Touch the WiFi button and activate WiFi. Select a network
from the list of available networks. If your network is
password protected, you will be prompted to enter the
password to be able to connect.
Touch the settings icon to see more settings for the network.
You can also see the signal strength and if the network is
password protected, indicated with a closed padlock.
You can also connect to a network with WiFi in WiFi Settings.
If you do not get any signal or have a low signal strength see
Troubleshooting.
Firmware Updates
Firmware Update Using WiFi
It is always recommended that you install the latest firmware
in your machine.
To be able to get the latest firmware you need to connect to a
network using WiFi. When connected, your machine will
automatically search for an available firmware update. If the
machine has detected that there is a newer firmware available,
the firmware update icon will be visible. Touch the icon to
download and install the latest firmware.
When the update is completed the machine will restart
automatically. Check the firmware version number in settings,
Machine Information.
60
A
A. WiFi is disconnected. Connect to a network through WiFi button or WiFi
settings.
B. WiFi is connected with low signal strength.
C. WiFi is connected with medium signal strength.
D. WiFi is connected with high signal strength.
E. WiFi is connected but the network does not work properly.
Indication that your machine does not have the latest firmware and that an update is
5 WiFi & mySewnet Services
B
C
D
available.
E