Mirror Side To Side And End To End; Touch Functions; Position; Rotate - Husqvarna VIKING Designer RUBY 90 User Manual

Mirror Side to Side and End to End

To mirror a design horizontally, touch the mirror side to side
button. To mirror vertically, touch the mirror end to end
button.

Touch Functions

You can position, rotate, scale and pan directly on the multi-
touch screen using your fingers. Touch & hold on a touch
function to lock it. A padlock below the button indicates that
the function is locked. This will prevent activation of another
touch function by mistake when working with your design(s)
directly on the multi-touch screen. Select any touch function
to unlock.

Position

Touch and move a selected design with your finger to
position it anywhere in the embroidery area. The touch
function, position, will automatically be activated.
Use the wheel to adjust the position of the selected design(s).
The numbers above the position button show, in
millimeters/inches, the horizontal and vertical distance from
the center of the hoop for the selected design(s). Touch in
the number field to enter a custom value. If an invalid value
is entered, the color of the numbers will change.
Touch the center of the control wheel to position the
selected design(s) in the center of the hoop.

Rotate

Touch and move the round handle to rotate the selected
design(s).
Use the wheel arrows to adjust the rotation of the selected
design(s) in one degree increments. Each touch in the center
of the control wheel will rotate the selected design(s) 90
degrees clockwise. The number above the rotate button
shows, in degrees, the current rotation angle. Touch in the
number field to enter a custom value. If an invalid value is
entered, the color of the numbers will change.
114
1. Mirror side to side
2. Mirror end to end
8 Embroidery
Touch function pan is locked