Patchwork Program; Single Stitch Program; Combining Programs - Husqvarna VIKING Designer Epic 3 User Manual

Patchwork Program

The patchwork program makes it possible for you to
Stitch Repeat
program an exact stitch length that can be sewn repeatedly.
Patchwork Program

Single Stitch Program

This is very useful when quilting.
2
REPETITIONS
To program a seam length, touch stitch repeat and select
patchwork program. Sew until you reach your desired seam
length and press the reverse button while sewing. The reverse
Stitch Free Create Stitch
Balance
Tie Off
Repeat Motion Sequence Creator
indicator on the machine will be lit until the current
repetition is finished. This will set the length of the seam.
Once you have set the length of a seam, the patchwork
program is inactive. The single stitch program is now
activated instead. The number of stitch repetitions included
in your programmed patchwork seam is shown. Adjust the
length of the seam, by increasing/decreasing the number of
repetitions using the +/- controls.
Single Stitch Program
The single stitch program lets you decide how many
repetitions of a stitch you want to sew. Touch stitch repeat
and select single stitch program. Set the number of
repetitions using the +/- controls. The machine will stop
automatically when the repetitions are sewn.

Combining Programs

Combining tapering and patchwork programs makes it
possible to repeat a tapered seam with the same length.
Activate tapering . Sew your desired length. When the reverse
button is pressed the reverse indicator will increase the light
until the end taper and last repetition of the stitch is finished.
The seam is now programmed and the single stitch program
is activated. When you start sewing again the seam will
automatically be repeated with the same length.
The number of repetitions are shown. Adjust the length of
the seam, by increasing/decreasing the number of repetitions
using the +/- controls.
Note: The tapering is included in the repetitions shown on the screen.
82 7 Sewing