Delete/Delete All; Mirroring; Move Into Hoop; Undo/Redo - Husqvarna VIKING Designer Epic 3 User Manual

Delete/Delete All

Touch the delete icon, and the selected design(s) will be
deleted from the embroidery area. If more than one design is
selected, a pop-up message will appear. Touch OK to
confirm to delete selected designs.
If you touch & hold on the delete icon a pop-up will appear
to ask if you want to delete all loaded designs from the
embroidery area. Touch OK in the pop-up message to
confirm.

Mirroring

To mirror a design sideways, select mirror side to side. To
mirror a design lengthwise, select mirror end to end.
Mirror side to side/mirror end to end

Move into Hoop

A red frame will surround the embroidery area if a design is
placed outside the hoop area. Select move into hoop to move
any design that is outside the hoop area into the hoop area.
The design will be placed at the outermost edge of the hoop.

Undo/Redo

Touch the arrow pointing left to undo your latest design
adjustment. Touch repeatedly to step back through your
adjustments.
Undo/redo
Touch the arrow pointing right to redo your latest design
adjustment. Touch repeatedly to step forward through your
adjustments. Redo is only activated when undo has been
touched.
Note: Not all adjustments can be undone. They will be greyed out if
undo/redo are not possible.

Pan

To pan the embroidery area, touch anywhere outside the
loaded design(s) and move your finger.
To return to centered view of the hoop, touch zoom to hoop.
9 Embroidery Edit 105