Edit Stitch In Stitch Creator; Zoom Options; Move; Duplicate Selected Stitch Point - Husqvarna VIKING Designer Epic 3 User Manual

Edit Stitch in Stitch Creator™

Zoom Options

When using the zoom slider, the focus will be on the marked
stitch point.
The distance between the grid lines at 100% zoom, equals
1mm on the fabric. If you zoom in on the stitch field, the
distance between the grid lines will change. If zooming out,
only the edge lines of the stitch field will be visible.
You can also zoom in/out by pinching and stretching or use
the zoom to 100%.

Move

To move your stitch or stitch point, you can select stitch
points directly on the screen using your fingers or by
touching the arrows in the wheel.
The number next to the vertical position shows the actual
needle position from the center line for the marked stitch
point.
The number next to the horizontal position shows the actual
feeding length from the previous stitch point.

Duplicate Selected Stitch Point

If you want to duplicate a stitch point, select the stitch point
and use duplicate to create a copy.
If several stitch points are selected, all stitch points will be
duplicated and inserted after the marked stitch point.
Touch & hold on the duplicate icon to enter the exact
number of duplicates you want to insert.

Delete Selected Stitch Point

If you want to delete a single stitch point, select the stitch
point and touch the delete icon. If more than one stitch point
is selected, they will all be deleted when touching the delete
icon.
Touch & hold on the delete icon to delete all stitch points in
the stitch field.

Mirroring

The selected stitch point(s) will be mirrored horizontally
and/or vertically.
Note: Only enabled if more than one stitch point is selected.

Triple Stitch

Touch the triple stitch icon and the selected stitch(es) will be
tripled.
Note: Only enabled if more than one stitch point is selected.
94
1
6
1. New stitch point
2. Mirror side to side
3. Duplicate
4. Select all
5. Previous stitch
6. Triple stitch
7. Mirror end to end
8 Stitch Creator™ Feature
2 4 5
3
7 9 10 11 12
8
8. Delete
9. Select multiple
10. Next stitch
11. Actual feeding length
12. Actual needle position
13. Fine tuning controls
Mirror side to side/end to end
Triple Stitch
13