Packing Away After Sewing; Usb Ports; Using A Usb Device; Led Lights - Husqvarna VIKING Designer Epic 3 User Manual

Packing Away After Sewing

Long press the power button (about 2 seconds) to turn off
the machine.
Note: If the button is released within 2 seconds, the machine will remain
with power on.
Unplug the cord from the wall socket and then from the
machine.
Unplug the foot control cord from the machine. Pull the
cord gently and release. The cord will retract into the foot
control.
Place all accessories in the accessory tray. Slide the tray on to
the machine around the free arm.
Place the foot control in the space above the free arm.
Put on the cover.
Tip: The user's guide and power cord can be stored in the pocket of the
cover.

USB Ports

Your machine has two USB ports for connecting USB
devices such as a memory stick. USB plugs can only be
inserted one way – do not force them into the ports! To
remove, carefully pull the USB device.
Note: Make sure that the USB stick you use has the format FAT32.

Using a USB Device

The external device button in file manager is only active
when a device is connected to the machine USB port.
Note: Do not remove the USB device if a loading spinner is shown on
the screen or while the file manager is shown. Removing the device at
that time can damage the files on your USB device.
Read more in USB Device.

LED Lights

Your machine has LED lights which distribute the light
evenly over the sewing area and eliminate shadows. You can
adjust the brightness of the light in the settings menu.

Free Arm

To use the free arm, slide off the accessory tray. When
attached, a hook keeps the accessory tray locked to the
machine. Remove the tray by sliding it to the left.
2 Preparations 27