Saving A Sequence; Sew Or Embroider Your Sequence; Adjust The Entire Sequence; Using Sequence In Sewing Mode And Embroidery Edit - Husqvarna VIKING Designer Epic 3 User Manual

Saving a Sequence

To save your file, touch save. You can choose to save the file
to the mySewnet cloud folder or to a USB device. Previously
saved designs, stitches, sequences and/or fonts are shown.
Learn how to organize your saved files in File Manager.

Sew or Embroider Your Sequence

To sew your stitch sequence, load it to sewing mode by touching OK in sequence.
If you have opened sequence in embroidery edit, touching OK will load your sequence to embroidery edit.
Note: A sequence created in embroidery mode will be loaded and saved as a design and can not be sewn as a stitch in sewing mode.

Adjust the Entire Sequence

To adjust the entire sequence, enter sewing mode by touching OK. Adjustments made in sewing mode will affect the entire
sequence. Read about edit stitch.

Using Sequence in Sewing Mode and Embroidery Edit

In sewing mode it is possible to start sewing anywhere in the sequence. Use the arrows to step through the sequence. In sewing
mode you can edit your entire sequence.
If you are in sewing mode an want to edit a stitch in the sequence, touch "edit in sequence" and the stitch will open in sequence.
Make your adjustments and touch OK to load it to sewing mode again. Touch cancel to undo.
Note: Touch and hold in the stitch field area to open the smart toolbox to access edit in sequence.
In embroidery edit you can make changes to your sequence just like when editing a design.
If you want to edit a sequence loaded to embroidery edit touch the sequence and sequence will be highlighted. Touch to open
sequence again. Make your adjustments and touch OK to load it to embroidery edit. Touch Cancel to undo.

Pop-up Messages in Sequence

To make your sewing experience as convenient as possible, your machine sometimes communicate with you using pop-up
messages. Those messages can contain warnings, recommendations, information or prompt you to perform an action.
Below, some of the messages that can appear are listed and explained.
Stitch Cannot be Added in Sequence
Some stitches are not possible to insert in a stitch sequence,
for example buttonholes and special stitch menus such as 4-
way stitches.
Maximum Number of Stitches Has Been Reached
The stitch you are trying to add will make the stitch sequence
too long. Your stitch sequence can be up to approximately
500 mm (20") long and contain up to 199 stitches and
commands. If the stitch sequence exceeds the maximum
length this pop-up message will appear.
11 Sequence
Save button
135