Review The Embroidery Stitch-Out Settings - Husqvarna VIKING Designer Epic 3 User Manual

Review the Embroidery Stitch-Out Settings

Before starting to embroider, review the embroidery stitch-
out settings to check that everything is set as you desire. You
can select to skip this screen in future embroideries.
Attached Needle Plate
The straight stitch plate is generally recommended for best
results in embroidery. Your DESIGNER EPIC™ 3 machine
senses which needle plate is attached. If the needle plate
shown is not the one you wish to use, attach your preferred
needle plate.
Selected Hoop
The currently selected hoop in embroidery edit is shown. If
you want to change the hoop, return to Embroidery Edit and
change the hoop in Hoop Options.
Selected Foot Type
Select which embroidery foot type you will use for the
embroidery. The Sensor Q-Foot and deLuxe™ Stitch System
are recommended for best embroidery results.
Basting Options
Select basting to add a basting stitch that will secure your
fabric to your stabilizer. You can choose either baste around
design or baste around hoop or both. Basting can also be
activated in the color block list. Read about basting options.
Thread Cut Options
Any settings for the thread cut options made in embroidery
settings will be shown here and you can change the thread
cut options here as well.
Turn Off Stitch-Out Settings
Check the "Don't show this information again" box to go
directly to embroidery stitch-out, without reviewing the
embroidery settings.
This function can be reactivated in machine settings.
1
2
3
4
5
6
7
1. Attached needle plate
2. Selected hoop & foot type
3. Color options
4. deLuxe™ Stitch System
10 Embroidery Stitch-Out
Embroidery Stitch-Out Settings
Review the settings below before you proceed.
Attached Needle Plate
For best result in embroidery, use the straight stitch plate. Some embroidery techniques
require more space for the needle or thread and the straight stitch plate cannot be used.
Standard ZigZag Plate
Straight Stitch Plate
Selected Hoop and Foot Type
Designer Jewel Hoop II 240 x 150
Sensor Q-Foot
Floating Foot (e.g. R-Foot)
Color Block Options
Sort Color Blocks
Sort
Merge Color Blocks
No Color Merge
Merge
One Color
deLuxe Stitch System
deLuxe Stitch System
Basting Options
Baste Around Design Baste Around Hoop
Thread Cut Options
Off
Automatic Thread Cutter
Automatic Thread Cutter and Jump Stitch Trim
Don't show this page again
Cancel Apply
5. Basting options
6. Thread cut options
7. Don't show this page again
121