Stitch Creator™ Feature - Overview - Husqvarna VIKING Designer Epic 3 User Manual

Stitch Creator™ Feature – Overview
In Stitch Creator™, you can create completely new stitches and adjust every single stitch point. You can create a stitch all on
your own or alter already built–in stitches or letters.
The width of the stitch field is 9mm and maximum stitch length is 5mm. The grid and the vertical center line will help you to
create your stitch.
Stitch Creator™ feature can be used in both sewing mode and in embroidery edit.
If you want to edit a stitch created in Stitch Creator™, touch and hold on the work area and the smart toolbox will appear.
Your stitch can be saved to the mySewnet cloud folder or to a USB device. In embroidery edit the stitch is saved as a design and
cannot be sewn as a stitch in sewing mode.
A stitch created in Stitch Creator™ feature can be used as part of a sequence. In sequence, locate your saved stitch. The stitch
will be inserted at the cursor position in the sequence.
Note: Some stitches and fonts are not available to edit in Stitch Creator™ feature, for example buttonholes, stitches wider than 9mm and four
direction stitches.
1
2
3
5
1. Cancel
2. Zoom options
3. Stitch field
4. Preview
92
4
5. Edit stitch
6. Keyboard
7. Control
8. Save
8 Stitch Creator™ Feature
6
9. File manager
10. Font menu
11. Stitch menu
12. OK
12
11
10
9
8
7