Quick Help; Common Functions - Husqvarna VIKING Designer Epic 3 User Manual

Quick Help

On almost every function and icon on screen, you can get a
short description by using the quick help function.
Touch the question mark icon. Then touch an icon or an area
on the screen you want information about.
Some quick helps will refer to the user's guide for more
information.

Common Functions

The following functions on the screen are used frequently.
OK
Confirms changes and pop-up messages and returns to
previous window.
Cancel
Cancels changes and pop-up messages and returns to
previous window.
Touch & Hold
Some buttons have additional functions, marked with an
arrow at the lower right corner. To access those functions,
touch & hold on the icon for a few seconds.
Smart Toolbox
The smart toolbox is available in the sewing and embroidery
area. Touch & hold anywhere in your work area to open the
smart toolbox and select the option you want.
The options included in the smart toolbox differ depending
on where they are used. For example; duplicate, delete,
mirroring and edit.
Customize Your Work Area
The DESIGNER EPIC™ 3 allows you to access the
functions you use the most by arranging them as you desire
on the screen. Touch & hold the move icon in the center
until the control pop's up. Drag and drop it to desired
Move
location. Your machine will remember your changes when
turning your machine off. Touch the x to close the control.
To reset the toolbar to default, use smart toolbox and select
reset toolbar.
4 The Multi-Touch Screen 57