Edit And Adjust Your Sequence; Sequence Commands - Husqvarna VIKING Designer Epic 3 User Manual

Edit and Adjust Your Sequence

Adjust Stitch Settings
You can adjust the length and width of the stitch or change
the density or position of the selected stitch. The adjustments
work just like in sewing mode.
Duplicate
To duplicate a stitch, move the cursor to the stitch you want
to duplicate. Touch the duplicate icon to copy the selected
stitch.
Note: If you make adjustments on the stitch before duplicating, the
copied stitch includes the adjustments.
Touch & hold to get a pop-up where you can enter the exact
number of copies you want to insert.
Delete
If you want to delete a stitch or letter, touch the stitch or
move the cursor to the stitch or letter you want to delete and
touch delete. Touch & hold to delete the whole sequence.

Sequence Commands

You can insert tie-off, stop and thread cut commands into
the sequence. These commands will be included in the
sequence and will always be performed when sewing it.
Use the tie-off command if you want a secure tie-off. You
can insert the tie-off commands anywhere in the sequence.
Note: If creating a sequence in embroidery mode, tie-off at the beginning
and end will be added automatically, allowing you to create a sequence in
between. The commands can be removed.
Insert a stop command if you want the machine to stop. This
is useful for example at the end of the sequence if you want
to sew it only once or to create a sequence in several rows.
Insert a thread cut command if you want the machine to tie-
off and cut the threads and raise the presser foot.
Move the cursor to the position where you want to add a
command. Select it and an icon will be added into the
sequence. This confirms that the command is inserted and it
also shows where the command will be performed in the
sequence.
Note: The commands will appear on the screen in the order you program
them.
134 11 Sequence