Edit Stitch; Resize; Resize Adjustments - Husqvarna VIKING Designer Epic 3 User Manual

Edit Stitch

Touch edit stitch to open the control window for adjusting
selected stitch.
Note: The default setting is always shown in white numbers.
Read about adjusting your stitch in Edit Stitch.

Resize

Resize can reduce or increase an embroidery design. The
machine recalculates the number of stitches in the design so
the original stitch density remains.
Note: To reduce or increase the design less than 20%, use the scale
function. The scale function does not change the stitch count.

Resize Adjustments

To change the size of the design, touch one of the resize
handles in the corners of the design selection frame and
move your finger on the screen. When resizing, the height
and width of the design are always adjusted proportionally.
You can also use the direction arrows to reduce or increase
the design. The numbers show the current width and height
in millimeters/inches.
When you resize a design the original size icon will be
enabled.
Touch to return to the original size (length and width).
Adjust the placement of the design in the hoop using move
and/or rotate.
Retain Fill Type
Some fill areas in an embroidery design are made in a specific
fill type to achieve the best results. When enlarging or
reducing a design, the stitches in the fill area will be affected.
The retain fill type function is selected by default, this will
keep the fill types as they were originally created.
Retain fill type gives the best result in most cases. If your
design becomes distorted, try resizing without retaining the
fill type. Reload the original design, deselect retain fill type
and resize your design again.
Embroider Your Resized Design
When you are satisfied with the design size and position,
touch OK. The resize window will close and your resized
design is loaded to the embroidery edit window.
Touch cancel to return to embroidery edit without resizing.
Note: Stitches and stitch programs cannot be resized.
108
1
2
1. Original size
2. Retain filltype
3. Resize
9 Embroidery Edit
Resize
3 4 5
4. Rotate
5. Move
Retain Fill Type