Thread Cut Options; Presser Foot Height Embroidery; Select Default Hoop Size; Review Embroidery Settings - Husqvarna VIKING Designer Epic 3 User Manual

Thread Cut Options

Choose between three thread cut options: no thread cuts,
automatic thread cut and a combination of automatic thread
cut and automatic jump stitch trim.

Presser Foot Height Embroidery

When using the Embroidery/Darning Foot R, the presser
foot height can be adjusted for improved performance when
using different weights of material and/or embroidery
threads.

Select Default Hoop Size

Touch to open a list of available hoop sizes. The selected
hoop will be the default hoop when loading any design to the
embroidery area, independent of the design size.
If no default hoop size has been selected your machine will
choose the most suitable hoop for your embroidery.

Review Embroidery Settings

If you do not want to review your embroidery settings every
time before you enter embroidery stitch out you can deselect
this option.
12 Settings 141