Deluxe™ Stitch System; Zoom Options; Hoop Position; Current Stitch Position - Husqvarna VIKING Designer Epic 3 User Manual

deLuxe™ Stitch System
The control visible in embroidery stitch-out will change
depending on whether the deLuxe™ Stitch System is active or
not in the embroidery settings. Use the controls to adjust the
balance between upper thread and bobbin thread, e.g. when
embroidering with specialty thread. Read more about the
deLuxe™ Stitch System in embroidery settings.

Zoom Options

Zoom options are available on the secondary top bar. Zoom
to all will show all the design(s) in the embroidery
combination. Zoom to hoop will zoom to show the whole
hoop on the screen.

Hoop Position

Use the hoop position options to move the embroidery hoop
Hoop Position
to different positions.
Current Stitch Trim
Park Center

Current Stitch Position

When you want to return to the current stitch position and
Stitch-Out Hoop Exact
Progress Position Position
continue embroidering after you have changed the hoop
position, touch the current stitch position. You can also press
the start/stop button, on the front of the machine, once to
return to the current stitch position and start the embroidery.

Park Position

When you have finished your embroidery, remove the hoop
and select park position. The embroidery arm will be placed
in a position that will allow easy storage. Use the park
position when you need to have a free sewing space with the
embroidery arm out of the way.

Trim Position

Trim position will move the hoop towards you, making it
easier to trim threads and fabric for specialty techniques.

Center Position

When you need to remove the hoop, e.g. when changing a
bobbin, touch the center position. This will also show the
center position of the hoop.
10 Embroidery Stitch-Out 125