Display & Audio Settings; Language; Time Format; Time Zone - Husqvarna VIKING Designer Epic 3 User Manual

Display & Audio Settings
All settings made in the machine settings will be saved, even
when turning your machine off.

Language

Select your desired language. All texts in your machine will be
changed after restart.

Time Format

Set if your clock show a 12– or a –24 hour format.

Time Zone

This is where you set your time zone. The clock is set to
UTC (Coordinated Universal Time) standards. For exemple
London is UTC time +/- 0 hours, New York is UTC -5
hours and Sydney is UTC +10 hours. Scroll through the time
zones to find the time zone you are in.

Audio Volume

Change the audio volume using the slider bar. All sounds in
your machine will be affected when the audio volume is
changed. When the slider is all the way to the left, the volume
is muted.

Audio Repeat

When active, the signal for some warning alerts or attention
pop-up messages will be repeated in intervals until the pop-
up is closed.

LED Work Light Brightness

Adjust the brightness of the LED lights to adapt to the light
conditions in your sewing room. Simply move the slider to
the right to make the LED lights brighter or to the left to
make them less bright.

Units

Touch millimeter or inch to set the measurement unit you
prefer.
142 12 Settings