Save Current State/Restore Current State; Auto Save - Husqvarna VIKING Designer Epic 3 User Manual

Save Current State/Restore Current
State
If you want to stop embroidering and save your current
position, touch start/stop to stop the embroidery. Then
touch the save icon. There you have the option to save
current state. You can now turn your machine off.
When saving current state, all your adjustments are stored
and you can continue the embroidery later by touching
"continue from saved state" at the home screen.
Note: You can only have one current state at a time.

Auto Save

When embroidering, your machine will continuously and
automatically save your ongoing work, including the current
stitch, current embroidery, current stitch position and settings.
If there is a power outage when you are in embroidery stitch-
out a pop-up will appear when your machine is restarted. In
the pop-up you can choose to return to embroidery stitch-
out and bring up the design ready to stitch. The embroidery
will start from approximately the same position as it was
interrupted from.
Note: Before starting the embroidery go back a few stitches using the
step stitch-by-stitch control to ensure that the threads will be secured.
128 10 Embroidery Stitch-Out