Scan Hoop; Background; Grid Options; Alignment - Husqvarna VIKING Designer Epic 3 User Manual

Scan Hoop

You can use your fabric as a background in embroidery edit.
Make sure the embroidery unit is attached and then touch
scan hoop.
The embroidery arm will need to calibrate. When the
calibration is complete, attach the hoop you want to use.
The scanning process will start when the hoop is attached
and you have given approval for the next step. If you want to
cancel the process you can press cancel in the pop-up
window.
When the process is done, you will see the scanned
background in the embroidery area.

Background

Customize your the embroidery area by choosing from
different type of backgrounds. You can use your scanned
hoop, a color similar to your fabric, or a background from
the mySewnet app.

Grid Options

Activate/deactivate grid by touching the check box.
Use the grid as a guide when you combine or place designs.
You can set the distance between the grid lines by entering a
number in the keypad.
Note: Touch & hold on the embroidery area to open the smart toolbox
and select grid on/off.

Alignment

If activated, guides will appear when moving your design
around the screen. This will help you to easier line-up two
designs to one another.

Background Color

Choose between different background colors for the
embroidery area that matches the color of the fabric you will
use.

mySewnet Send Design

Send selected embroidery designs directly to other mySewnet
enabled devices. Choose any of the available devices by
touching it. The pop-up closes and the selected design(s) are
sent.
Note: You can only send designs to devices connected to the same
mySewnet account.
9 Embroidery Edit 107