Table of Contents
Advertisement
Set Up
Spool pins
Your machine has two spool pins; a main spool pin and
an auxiliary spool pin. The spool pins are designed for all
types of thread. The main spool pin is adjustable and can
be used both in a horizontal position (the thread reels off
the spool) and a vertical position (the thread spool rotates).
Use the horizontal position for regular sewing threads and
the vertical position for large spools or specialty threads.
Horizontal position
Place a spool cap and the thread spool on the spool pin.
Make sure that the thread reels over the top. Slide on a
second spool cap.
Use a spool cap slightly larger than the thread spool. For
narrow thread spools, use a smaller spool cap in front of
the spool. For large thread spools, use a larger spool cap in
front of the spool.
The at side of the spool cap should be pressed rmly
against the spool. There should be no space between the
spool cap and the thread spool.
Vertical position
Raise the spool pin to the vertical position. Slide on the
large spool cap and place a felt pad under the thread spool
to prevent the thread from reeling off too fast. Place thread
spool on the spool pin.
Do not place a spool cap on top of the vertical spool pin as
it may prevent the spool from rotating.
Auxiliary spool pin
The auxiliary spool pin is used when winding a bobbin
from a second spool of thread or for a second spool when
sewing with a twin needle.
Raise the auxiliary spool pin. Slide on a large spool cap and
place a felt pad under the thread spool. Place thread spool
on auxiliary spool pin.
2:4
Advertisement
Table of Contents
