Husqvarna VIKING Designer Epic 3 User Manual page 34

4. Pull the thread between the thread tension discs (D).
Thread down through the right threading slot and then
upwards through the left threading slot. Bring the thread
from the right into the take-up lever (E) until it clicks
into place (F), and down in the left threading slot to the
last thread guide (G) just above the needle.
5. Thread the needle using the automatic needle threader or
manually.
Before using the automatic needle threader, carefully read
the instructions and recommendations, see Using the
Automatic Needle Threader, page 35.
34 2 Preparations