Attaching And Removing The Hoop; Using The Hoop Adapter - Husqvarna VIKING Designer Epic 3 User Manual

Attaching and Removing the Hoop

The hoop attachment is positioned on the embroidery arm.
Place the hoop in the hoop attachment and carefully push
the hoop down until it clicks in place.
To remove the hoop, press the release button towards the
embroidery arm.
The hoop will be released and can now be removed.

Using the Hoop Adapter

The hoop adapter makes it possible to use older hoops that
are not compatible with this embroidery unit.
1. Slide the hoop into the hoop adapter from front to back
until it clicks into place.
Hoop your fabric.
2. Place the hoop adapter in the hoop attachment on the
embroidery arm and carefully push it down until it clicks
in place.
3. To remove the hoop adapter/hoop, press the release
button towards the embroidery arm.
The hoop adapter/hoop will be released and can now be
removed.
4. To remove the hoop from the hoop adapter, press the
grey button on the hoop adapter and slide the hoop
towards you.
54
1
3
3 Embroidery Preparations
2
4