External Clocking Ports Specifications on the ACX1000 and ACX1100
Router
The external clocking port on the ACX1000 and ACX1100 router contains four SMB connectors that
support 10 MHz GPS and 1 pulse-per-second (PPS) signals. These signals are internally isolated and
have surge protection. Use a Molex 50-ohm SMB connector or equivalent (not provided) to connect to
the external clocking ports.
SEE ALSO
ACX1000 and ACX1100 Universal Metro Router Overview | 2
Front Panel of an ACX1000 Router | 48
LEDs on ACX1000 and ACX1100 Routers | 55
Clocking Ports on the ACX1000 and ACX1100 Router | 47
91