External Clocking Ports Specifications On The Acx1000 And Acx1100 Router - Juniper ACX1000 Hardware Manual

External Clocking Ports Specifications on the ACX1000 and ACX1100 Router

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Alarm, Management, and Clocking Cable Specifications and Pinouts
Front Panel of an ACX2200 Router
The external clocking port on the ACX1000 and ACX1100 router contains four SMB
connectors that support 10 MHz GPS and 1 pulse-per-second (PPS) signals. These signals
are internally isolated and have surge protection. Use a Molex 50-ohm SMB connector
or equivalent (not provided) to connect to the external clocking ports.
ACX1000 and ACX1100 Universal Access Router Overview on page 3
Front Panel of an ACX1000 Router on page 30
LEDs on ACX1000 and ACX1100 Routers on page 35
Clocking Ports on the ACX1000 and ACX1100 Router on page 29
75