Juniper ACX1000 Hardware Manual page 64

Table 8: System LED on the Front Panel
Label Color
T1/E1 Port LEDs
The front panel of the ACX1000 router has eight T1/E1 ports, each with one pair of port LEDs.
on page 56 describes the LEDs in more detail.
Table 9: T1/E1 Port LEDs
Name Location
Link Left
Link Right
(remote
alarms)
Ethernet Port LEDs
Each Gigabit Ethernet RJ-45 port on the front panel of the router has one pair of port LEDs.
page 56 describes the LEDs in more detail.
Table 10: Ethernet Port LEDs
Name Location
Link Right
(Continued)
State Description
On Router has failed.
steadily
Color Description
Green Online with no alarms or failures.
Red Active with a local alarm; router has detected a failure.
– Not enabled.
Yellow Online with alarms for remote failures.
Color State
Amber On
Description
Link is online.
56
Table 9
Table 10 on