Connecting The Acx1000 Or Acx1100 Router To An External Alarm-Reporting Device - Juniper ACX1000 Hardware Manual

• Stop bits—1
• Flow control—None
Figure 27: Routing Engine Console and Auxiliary Cable Connector
Figure 28: Auxiliary and Console Connections
RELATED DOCUMENTATION
Installing and Connecting an ACX1000 or ACX1100 Router Overview | 93
General Site Guidelines | 68
Management Port Connector Pinout Information for ACX Series Routers | 88
Connecting the ACX1000 or ACX1100 Router to an External Alarm-
Reporting Device
To connect the router to external alarm-reporting devices, attach wires to the ALARM relay contacts on
the front panel of the router. A system condition that triggers the red or yellow alarm on the router also
activates the corresponding alarm relay contact.
109