Juniper ACX1000 Hardware Manual page 58

• AC power inlets or DC power terminals
• USB port for upgrading Junos OS
• Management Ethernet port labeled MGMT
• Console or auxiliary port labeled CONSOLE/AUX
• Alarm contact port labeled ALARM—accepts a DE-15 alarm cable
• External clocking input port labeled EXT REF CLK IN
• External clocking ports supporting 1PPS and 10MHz input and output
• Network ports and corresponding status LEDs:
• Eight Gigabit Ethernet (GE) RJ-45 ports labeled 0/0/0 through 0/0/7
• Combination ports labeled 0/1/0 through 0/1/3, either:
• Four Gigabit Ethernet RJ-45 ports
• Four Gigabit Ethernet SFP ports that accept SFP transceivers
Figure 12: Front Panel of the AC-Powered ACX1100 Router
AC inlets
1
—
2 Management Ethernet port
—
3 Alarm contact port
—
4 Gigabit Ethernet (GE) ports
—
Combination Gigabit Ethernet RJ-45 ports
5
—
Combination Gigabit Ethernet SFP ports
7
—
8 External clocking ports
—
9 Console or auxiliary port
—
10 USB port
—
System (SYS) LED
11
—
50