Juniper ACX1000 Hardware Manual page 60

Unless otherwise specified, the information about uplink ports applies to both ACX1000 and ACX1100
routers.
TIP: You can find information about the pluggable transceivers supported on your Juniper
Networks device by using the Hardware Compatibility Tool. In addition to transceiver and
connector type, the optical and cable characteristics—where applicable—are documented for
each transceiver. The Hardware Compatibility Tool allows you to search by product, displaying all
the transceivers supported on that device, or category, displaying all the transceivers by interface
speed or type. The Hardware Compatibility Tool is located at
The list of supported transceivers for the ACX1000 is located at
pathfinder.juniper.net/hct/product/#prd=ACX1000. The list of supported transceivers for the
ACX1100 is located at
T1/E1 Ports
The ACX1000 router has eight T1/E1 ports located on the front panel.
the ports in more detail.
Table 5: T1/E1 Port Features
Feature
Line rate
Encapsulation
Framing
https:/ /pathfinder.juniper.net/hct/product/#prd=ACX1100.
Description
E1: 2.048 Mbps per channel
T1: 1.544 Mbps per channel
TDM (SAToP) mode
ATM PWE3/ATM IMA Mode
Superframe (D4)
Extended superframe (ESF)
Framed clear channel
https:/ /apps.juniper.net/hct/.
https:/ /
Table 5 on page 52
52
describes