Troubleshooting Acx1000 And Acx1100; Troubleshooting Resources For Acx1000 And Acx1100 Routers - Juniper ACX1000 Hardware Manual

Troubleshooting ACX1000 and ACX1100

IN THIS SECTION

Troubleshooting Resources for ACX1000 and ACX1100 Routers | 130

Monitoring System Log Messages | 131
Verifying Active Alarms | 131
Alarm Types and Severity Classes on ACX Series Routers | 133
Troubleshooting Resources for ACX1000 and ACX1100 Routers
IN THIS SECTION
Command-Line Interface | 130
Front Panel LEDs | 130
Command-Line Interface
The Junos OS command-line interface (CLI) is the primary tool for controlling and troubleshooting router
hardware, the Junos OS, routing protocols, and network connectivity. CLI commands display information
from routing tables, information specific to routing protocols, and information about network
connectivity derived from the ping and traceroute utilities.
You enter CLI commands on one or more external management devices connected to ports on the front
panel.
For information about using the CLI to troubleshoot the Junos OS, see the appropriate Junos OS
configuration guide.
Front Panel LEDs
The front panel on the router contains LEDs that allow you to troubleshoot the router.
130