Juniper ACX1000 Hardware Manual page 16

ACX1100 Routers Hardware and CLI Terminology Mapping
Table 2 on page 8 describes the hardware terms used in ACX1100 router documentation and the
corresponding terms used in the Junos OS command line interface (CLI).
the port locations of the interfaces.
Table 2: CLI Equivalents of Terms Used in Documentation for ACX1100 Routers
Hardware Description (as
Item (as displayed in the CLI)
displayed in
the CLI)
Chassis ACX1100
n )
FPC ( Abbreviated name
of the Flexible PIC
Concentrator (FPC)
n )
PIC ( Abbreviated name
of the Physical
Interface Card (PIC)
8x 1GE (RJ-45)
One of the
following:
•
4x 1GE (RJ-45)
•
4x 1GE (SFP)
Value (as Item in Documentation
displayed in the
CLI)
– Router chassis
n is
Value of The router does not
always 0. have actual FPCs. In this
case, FPC refers to the
router itself.
n is a value in the
The router does not
range of 0–1. have actual PIC devices;
see entries for PIC 0
through PIC 2 for the
equivalent item on the
router.
PIC 0 Built-in uplink ports on
the front panel of the
router
PIC 1 Built-in uplink ports on
the front panel of the
router
Figure 6 on page 9 shows
Additional Information
"Chassis Physical
Specifications for
ACX1000 and ACX1100
Routers" on page 71
Interface Naming
Conventions Used in the
Junos OS Operational
Commands
Interface Naming
Conventions Used in the
Junos OS Operational
Commands
"ACX1000 and
ACX1100 Universal
Metro Router Overview"
on page 2
"ACX1000 and
ACX1100 Universal
Metro Router Overview"
on page 2
8