Juniper ACX1000 Hardware Manual page 70

You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that supply AC power to
the router. The C15 appliance coupler end of the cord, as described by International Electrotechnical
Commission (IEC) standard 60320, inserts into the AC appliance inlet coupler. The plug end of the
power cord fits into the power source receptacle that is standard for your geographic location.
Table 15 on page 62 provides specifications on the AC power cord provided for each country or region.
Table 15: AC Power Cord Specifications
Country Model Number
Australia
China
Europe (except Italy,
Switzerland, and
United Kingdom)
Italy
Japan
Korea
Switzerland
North America
United Kingdom
WARNING: The AC power cord for the router is intended for use with the router only
and not for any other use.
WARNING: The attached power cable is only for this product. Do not use the cable for
another product. Translation in Japanese follows:
Electrical Specification
CBL-GP-C15-AU 250 VAC, 10 A, 50 Hz
CBL-GP-C15-CH 250 VAC, 10 A, 50 Hz
CBL-GP-C15-EU 250 VAC, 10 A, 50 Hz
CBL-GP-C15-IT 250 VAC, 10 A, 50 Hz
CBL-GP-C15-JP 125 VAC, 15 A, 50 Hz or 60 Hz
CBL-GP-C15-KR 250 VAC, 10 A, 50 Hz
CBL-GP-C15-SZ 250 VAC, 10 A, 50 Hz
CBL-GP-C15-US 125 VAC, 13 A, 60 Hz
CBL-GP-C15-UK 250 VAC, 10 A, 50 Hz
Plug Type Design Standard
SAA/3 AS/NZZS 3112-2000
PRC/3 GB2099, GB1002
VIIG CEE (7) VII
I/3G CEI 23–16
498GJ JIS 8303
VIIG CEE (7) VII
12G SEV 1011 / 6534-2
498G NEMA 5-15
BS89/13 BS 1363/A
62